Module, DP and CP for Spur Gear Hobs
2021-11-26 10:16:31
jiangxingTools
3233
Module, DP and CP for Spur Gear Hobs
In most English-speaking countries, diametral pitch and circular pitch are used instead of the module.
lt is best to convert the above values into module and to proceed with the calculated module in the usual way.
The equations for the conversion into module are:
m = 25.4 / DP
m = 25.4 · CP / 3.1416
You are welcome to visit our new website for more details on gear cutting tools and gear hobs.
相關(guān)文章
-
STD Involute Spline Hob Cutter with Profile DIN 5480
STD Involute Spline Hob Cutter with Profile DIN 5480basic hob profile to DIN 5480 standardmodule: m0... - PA20° DIN3972 Standard Gear Hob with Module m14
- Spline gear hob with Involute flanks to DIN 5480
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hob Cutter with Module m6.5
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hobbing Cutter with Module m2.25
- HSS M2, M35 Timing Belt Pulley Gear Hob with TiN, TiALN Coating
- HSS Erasteel Bohler M35 Material DP and Module Gear Hob Cutter with AP Coating
