Description of Gear Hobbing Workpiece
2021-12-16 08:51:59
jiangxingTools
3277
Description of Gear Hobbing Workpiece
1) Module
2) Pressure angle
3) Helix angle
4) Number of teeth
5) Tip diameter
6) Root diameter or toot height
7) Profile displacement factor or standards for setting the tooth thickness
8) Gear width
9) Material and tensile strength
10) Number of workpiece to be machined, lot size, if applicable
相關(guān)文章
-
HSS M2, M35 Gear Hobbing Cutters with Protuberance
HSS M2, M35 Gear Hobbing Cutters with Protuberancegear hobbing cutters for automobile and indus... - Gear Hobbing Cutter Module Pre-Shaving Gear Hobs with Class AA
- Nominal PCD 180mm M2.5 Gear Shaving Cutter with PA20°
- PA20° PCD 200mm Disc Type Gear Shaper Cutter with Module m8~m12
- Involute Spline Gear Hob with DIN 5482
- Comparing composition of raw material for hobs
- Timing Pulley Hob for (AT.)D.T (D)T5
