Solid Carbide Hob
2022-11-03 10:00:08
jiangxingTools
2722
Solid Carbide Hob
Processing step for tungsten carbide gear hob cutter as following:
step o1-raw carbide material
step 02-inside diameter
step 03-end face grinding
step 04-hub grinding
step 05-tooth groove grinding
step 06-tooth profile grinding
step 07-final inspection
step 08-coating
相關(guān)文章
-
Nominal PCD 180mm M1.25 Gear Shaving Cutter with PA20°
Nominal PCD 180mm M1.25 Gear Shaving Cutter with PA20°Module: m1.25, pressure angle: PA20°tooth prof... - HSS M2 Material for Gear Cutting Tools and Gear Hob
- Convex Milling Cutter
- Taper Shanks for Shank Type Gear Shaper Cutters
- PA20° DP4 Standard Involute Gear Hob Cutter with BPⅡ
- Timing Pulley Hob for HTD 8M
- PA20° Standard Involute Gear Milling Cutter with Module m0.7
