Taper Shank Type Shaper Cutters with GB 6081
2023-04-06 08:19:39
jiangxingTools
2516
Taper Shank Type Shaper Cutters with GB 6081
These shank type shaper cutters are 20° PA, non-topping finishing cutters, for spur gears.
tooth profile can be done with GB 6082, DIN 1829, JIS B 4356, and BS 5246
Nominal pitch dia. 25mm, 38mm, module range: m1-m3.75
Diametral pitch shank type shaper cutter can be made as your request.
morse stub taper number is No. 2 or No.3
相關(guān)文章
-
Involute Spline Hob with PA45°
Involute Spline Hob with PA45°Material: HSS M2, M35, S390Module: m1, m1.25, m1.5, m2Tooth profile：GB... - HSS gear hobber cutter with relief ground DIN 8002 A
- HSS Material Procurement and Idendification
- PA20° Profile DIN3972 Standard Pre-grinding Gear Cutting Hob with Module m2.75
- HSS M2,M35, ASP30, ASP52, S390 Helical Type Gear Shaper Cutter with Chamfer
- PA20° Standard Gear Milling Cutter with Module m0.5
- PA20° Pre-shaving Gear Hob with Module m8
