Bohler S790 Microclean for Hobs
2022-08-19 13:50:02
jiangxingTools
2903
Bohler S790 Microclean for Hobs
Material composition of S790: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5, V-3, W-6.30
Standard: 1.3345, HS6-5-3C, EN ISO 4957
Performance feature of Gear Hobs with S790:
Toughness & Ductility: high
Wear Resistance: good
Compressive strength: good
Edge Stability: good
Grindability: high
Hot Hardness (red hardness): good
相關(guān)文章
-
PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m10
PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m10Tooh profile is according to GB,... - PA20° Pre-shaving Gear Hob with Module m7
- Parallel Side Spline Broach
- PA20° Standard Involute Gear Milling Cutter with Module m2
- Considerations when selecting hobs
- M42, M35, M2 Timing Pulley Hobs with TiN, AP Coating
- PA20° PCD 100mm Disk Type Gear Shaper Cutter with Module m1~m6
