Bohler S705 for Gear Hobs and Cutters
2022-08-19 13:58:18
jiangxingTools
2953
Bohler S705 for Gear Hobs and Cutters
Material composition of S705: C-0.92, Cr-4.10, Mo-5, V-1.9, W-6.20, Co-4.80
Standard: 1.3243, HS6-5-2-5, EN ISO 4957
Performance feature of Gear Hobs and Cutters with S705:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相關(guān)文章
-
Involute Spline Broach
Involute Spline BroachGB standardHSS M2, M35 materialaccuracy: class A... - PA20° DP22 Standard Gear Hob Cutter with BPⅡ
- HSS M2, M35, ASP30, ASP52, S390 Disk Type Gear Shaper Cutter with DIN3972 Profile
- RS100 Roller Chain Sprocket Hob with Pitch 31.75 x Roller Dia. 19.05
- Involute Serration Hob with DIN5481 Standard
- Timing Pulley Hob for (AT.)D.T (D)T20
- ?PA20° PCD 38mm Shank Type Gear Shaper Cutter with Module m1~m3.75
